WET 2000
High-production, compact concrete plant.
WET 2000
The WET 2000 family combines compact design, reliability, and strength to offer the most efficient choice for any project requiring a versatile and fully automated concrete batching plant. With a high production capacity packed into an optimized footprint, these plants are built to deliver maximum results with minimal hassle.
Pre-installed and thoroughly tested at our factory, they’re ready to go-saving you time, space, and costs from day one.
Highlighted benefits
- Delivered pre-installed from the factory to cut down assembly time significantly.
- No need for special foundations—just a standard concrete slab is enough.
- Comes with an air-conditioned control cabin and advanced computerised management system.
- Offers the power and technology of a large-scale plant, all within a compact design.
- Optimized for easy and cost-efficient transport in 40’ High Cube containers (silos not included).
Wet 2000S
Main characteristics
- Batching Cycles 2 m3.
- FTS 3000/2000 Twin shaft mixer.
- Group of 4 square hoppers on 25 m3 panel
- Aggregates batch by 2 m3 weighing conveyor.
- Scales to weigh cement, with a 1,000 kg weighing capacity.
- Water scales, with a 500-litre weighing capacity.
- Water dosing assembly, with meter, for additional water supply requirements.
- Water installation equipped with a 5.5 kW supply pump and pressure regulation system.
- Pneumatic installation equipped with a 7.5 kw compressor.
- Surface area required to install the plant 160 m2.
Wet 2000C
Main characteristics
- Batching Cycles 2 m3.
- FTS 3000/2000 Twin shaft mixer.
- Group of 4 square hoppers on 30 m3 panel (expandable to 80 m3 with automatic feeding system).
- Aggregates batch by 2 m3 weighing conveyor
- Lifting belt for transfer of aggregate to concrete mixer
- Scales to weigh cement, with a 1,000 kg weighing capacity.
- Water scales, with a 500-litre weighing capacity.
- Water dosing assembly, with meter, for additional water supply requirements.
- Water installation equipped with a 5.5 kW supply pump and pressure regulation system.
- Pneumatic installation equipped with a 7.5 kw compressor.
- Surface area required to install the plant 200 m2.
Wet 2000L
Main characteristics
- Batching Cycles 2 m3.
- FTS 3000/2000 Twin shaft mixer.
- Modular compact in line hopper group. Capacity 40‐125 m3.
- Aggregates batch by 2 m3 weighing conveyor.
- Lifting belt for transfer of aggregate to concrete mixer
- Scales to weigh cement, with a 1,000 kg weighing capacity.
- Water scales, with a 500-litre weighing capacity.
- Water dosing assembly, with meter, for additional water supply requirements.
- Water installation equipped with a 5.5 kW supply pump and pressure regulation system.
- Pneumatic installation, equipped with a 7.5 kw compressor.
- Surface required for the installation of the plant 400 m2
accessories
As far as you want to go…
All the Frumecar batching plants have many accessories to customize the equipment according to your needs.
Request for optional list to your distributor or contact us directly & increase the capacity of your machine as far as you want to go.
Basic production complements
- Silo for cement storage
- Cartridge-type filter for cement
- Screw conveyour for cement WAM with SIEMENS motor
- Filling system for cement silos with SIEMENS motor
- Automatic feeding system for aggregates
- Aggregates moisture HIDRONIX sensor
- Mixer moisture HIDRONIX sensor
- Admixtures dosing system
- Admixtures weighing system
- Water scale
Why choose a Frumecar concrete plant?
TECHNICAL CHARACTERISTICS
WET 2000S concrete plant
| Characteristics | Values |
| Production capacity (m3/ h) | 80 |
| Aggregates hoppers | 4 |
| Aggregates capacity (m3) | 25 |
| Cement Silos | 1-4 |
| Screw conveyor (mm) | 273 |
| Capacity per batch (m3) | 2 |
| Control cabin | Optional |
| Total power (Kw) | 119 |
| Absorbed power (Kw) | 107 |
| Transport requirements | 2*40´HC |
TECHNICAL CHARACTERISTICS
WET 2000C concrete plant
| Characteristics | Values |
| Production capacity (m3/ h) | 80 |
| Aggregates hoppers | 4 |
| Aggregates capacity (m3) | 30-80 |
| Cement Silos | 1-4 |
| Screw conveyor (mm) | 273 |
| Capacity per batch (m3) | 2 |
| Control cabin | Optional |
| Total power (Kw) | 149 |
| Absorbed power (Kw) | 129 |
| Transport requirements | 3*40´HC |
TECHNICAL CHARACTERISTICS
WET 2000L concrete plant
–
| Characteristics | Values |
| Production capacity (m3/ h) | 80 |
| Aggregates hoppers | 4-5 |
| Aggregates capacity (m3) | 40-125 |
| Cement Silos | 1-4 |
| Screw conveyor (mm) | 273 |
| Capacity per batch (m3) | 2 |
| Control cabin | Optional |
| Total power (Kw) | 154 |
| Absorbed power (Kw) | 133 |
| Transport requirements | 3*40´HC |
Contact
- C/Venezuela P. 17/10 Polígono Industrial Oeste 30169 Murcia (Spain)
- +34 968 89 00 00
- +34 968 89 07 77
- frumecar@frumecar.com
 |
 |
 |
| YOUTUBE |
